• Inventor 2012 Full [Mediafire]
• AutoDesk Inventor 2010 new Video Tutorial
• MasterCam X5 Full + ESP +Tutorial
• Download AutoCAD 2011 Training Books
• CNC Simulator v6.45 Multilanguage
• Catia V5R19 + SP2 + Documentation

In this tutorial, we will build a bearing puller. This product consists of three parts. We will learn a few new functions in this tutorial. We will also perform a simple analysis on some of the parts. The first part we will make is the main bridge. We will make this according to the drawing below. The sketch consists of two lines emanating from the origin: one line goes straight up and the other runs downwards under an angle of about 120 degrees to the first line. Both lines cross the outside edge of the part. We have also used centerlines in other tutorials. These lines are actually auxiliary lines. When you use a sketch to make an extrusion, for example, SolidWorks only uses the ‘real’ lines and not the auxiliary lines. In step 13 you have seen that you can easily change a ‘real line’ (or circle of arc) into an auxiliary line and vice versa. For this the option, the ‘For con-struction’ box in the PropertyManager must be checked.

Download Tutorial Book (pdf)